

CHANGEOVER SWITCHES 35A-3200A
The reliable and modular solution for your transfers
KOHLER-SDMO CHANGEOVER SWITCHES ARE PERFECTLY SUITED TO ALL POWER FAILURE SITUATIONS
Thanks to its expertise and knowledge in the energy business, KOHLER-SDMO offers a wide range of automatic changeover switches. SDMO Industries is able to meet all your requirements and adapt to each of your needs. The KOHLER-SDMO offer comprises 3 product ranges.
VERSO 100
This automatic changeover switch, which is reliable and simple to use, is equipped with the main functions of this type of equipment. The range extends from 35 to 160A.
VERSO 150D
The VERSO 150 D is a changeover switch sized to operate at an ambient temperature of 50 °C. The built-in mains detection relay has two fixed delays that prevent unwanted start-ups following mains micro disconnections, and allow controlled power return when it has become stable again. This range has been developed for markets subject to frequent major fluctuations in the mains power. Three ratings are available: 63 A, 100 A and 160 A.
VERSO 200
The Verso 200 is an automatic changeover switch intended for larger installations. This version is available from 200 to 630A in an IP20 metal control unit (IP55 on request) and from 800 to 3200A in an IP55 control unit.

ADVANTAGES OF THE PRODUCT
- A complete product, supplied in the form
of a fully assembled solution and tested
according to standard IEC* 60947-6-1 - Double integrated power supply (autonomous)
- Padlocking can be configured in 3
positions (I, O, II) - Robust switch-disconnector
- Clear mechanical indicator of the changeover switch position (I-O-II)
- Intrinsic mechanical locking
- Automatic genset start-up
- High dynamic resistance for even greater
safety, in the case of a short circuit closure - Presence of a manual control for all
emergency interventions - Simple and clear readout of the status of the installation.
A protected power supply is available on the 3 equipment models, in order to supply the charger and preheat the water of the genset.
TECHNICAL SPECIFICATIONS
VERSO 100 | VERSO 100 S | VERSI 100 D |
---|---|---|
Ratings (A) | 35 63 100 125 160 | 35 63 100 125 160 |
Type | Three phase | Three phase |
Voltage range – Frequency | 208/220/230/240v & 380/400/415/440 V – 50-60Hz | 208/220/230/240v & 380/400/415/480 V – 50-60Hz |
Display and setting | Potentiometer | Via LCD display |
Voltage drop tolerated | 20% of the nominal voltage @400V | 30% of the nominal voltage @400V |
Maximum voltage tolerated by the equipment |
288 V | 305 V |
Protects against a change in the phase rotation direction |
• | • |
Protection in “0” position | X | Immediate return to position 0 in the event of a fault |
Lightning arrester | X | O |
Confirmation of mains return | • | • |
EJP (for France only) | • | • |
Protection index | IP31 | IP54 |
Dimensions (h x w x d) mm | 385 x 385 x 193 | 600 x 400 x 200 |
VERSO 150D | |||
---|---|---|---|
Ratings (A) | 63 100 160 | ||
Type | Three phase | ||
Voltage range – Frequency | 230/400Vac 50-60Hz | ||
Display and setting | Potentiometer | ||
Adjustable voltage threshold | (+/-) 30% of 400Vac | ||
Voltage drop tolerated | 320/480 Vac between phases | ||
Protects against a change in the phase rotation direction |
• | ||
Lightning arrester | O | ||
EJP (for France only) | X | ||
Confirmation of mains return | X | ||
Protection index | IP65 | ||
Dimensions (h x w x d) mm |
|
VERSO 200 | ||||
---|---|---|---|---|
Ratings (A) | 200, 250, 400, 630 800, 1000, 1250, 1600 * 2000, 2500, 3200 | |||
Type | Three phase | |||
Voltage range – Frequency | 208/220/230/240v & 380/400/415/440 V – 50-60Hz | |||
Configuration | Auto-configuration of voltage/frequency min/max and configurable thresholds | |||
Display and setting | By LCD – Supplied with manually-operated key – Can be padlocked in manual mode |
|||
Voltage drop tolerated | 30% of the nominal voltage @400V | |||
Maximum voltage tolerated by the equipment |
332 V | |||
Protects against a change in the phase rotation direction |
• | |||
Lightning arrester | O (IP55) | |||
EJP (for France only) |
|
|||
Confirmation of mains return | • (configurable) | |||
Protection index |
|
|||
Inputs/outputs | 3 configurable dry contact inputs/2 configurable relay outputs | |||
Dimensions (h x w x d) mm |
|
• Standard O Option X Not available
PART NUMBERS FOR ORDERS
In order to make it easy to place orders, please find below all of the KOHLER-SDMO part numbers.
Please get in touch with your KOHLER-SDMO commercial contact and provide the desired parts list, below.
Your contact is also available for any advice or opinions regarding the choice of source changeover switch.
Verso 100 S | Verso 100 D | Verso 150 D | Verso 200 | ||||
---|---|---|---|---|---|---|---|
Nominal voltage range |
208 to 440V | 208 to 480V | 380 to 440V | 208 to 440V | |||
Number of pole | 3P | 4P | 3P | 4P | 4P | 3P | 4P |
Ratings | |||||||
35A | INS353 | INS354 | INS353D | INS354D | X | X | X |
63A | INS633 | INS634 | INS633D | INS634D | INS634CD | X | X |
100A | INS103 | INS104 | INS103D | INS104D | INS104CD | X | X |
125A | INS123 | INS124 | INS123D | INS124D | X | X | X |
160A | INS163 | INS164 | INS163D | INS164D | INS164CD | X | X |
200A | X | X | X | X | X | INB203 | INB204 |
250A | X | X | X | X | X | INB253 | INB254 |
400A | X | X | X | X | X | INB403 | INB404 |
630A | X | X | X | X | X | INB633 | INB634 |
800A | X | X | X | X | X | INB803 | INB804 |
1000A | X | X | X | X | X | INB1003 | INB1004 |
1250A | X | X | X | X | X | INB1253 | INB1254 |
1600A | X | X | X | X | X | INB1603 | INB1604 |
2000A | X | X | X | X | X | INB2003 | INB2004 |
2500A | X | X | X | X | X | INB2503 | INB2504 |
3200A | X | X | X | X | X | INB3203 | INB3204 |
VERSO 100 S
The Verso 100 S is the first changeover switch offered as part of our industrial
range. It covers three-phase ratings from 35 to 160A. It is one of the most
compact solutions on the market
ADVANTAGES OF THE PRODUCT
- Adjustments made using potentiometers
- Complies with standard IEC* 60947-6-1
- Secure maintenance (no contact with
conducting parts) - Handle for manual emergency
operation supplied as standard - EJP function (without management of EJP
priority) – (for France only) - Kit for earthing neutral
- Programmable timings
- Stable positions not affected by
vibrations and impacts - Monitoring by a microprocessor
VERSO 100 D
This product is a more advanced automatic changeover switch.
It is available, as standard, with the IP54 protection rating.
The Verso 100 D is available up to 160A
ADVANTAGES OF THE PRODUCT
- Adjustments (thresholds and timings)
facilitated by a MMI - Complies with standard IEC* 60947-6-1
- One of the most compact solutions on
the market - Secure maintenance (no contact with
conducting parts) - Handle for manual emergency
operation (supplied as standard) - Monitoring by a microprocessor
- Return to position 0 in the event of faults
on the mains power side - Lightning arrester
- Possibility of up to 480V
- Complete EJP function (for France only)
- IP54 wall-mounted control unit with panel
- The cables can be installed
through the top or bottom, which makes
connection easy. The control unit is therefore
suited to all situations. - Programmable timings

ADVANTAGES OF THE PRODUCT
- A three-phase mains detection relay with voltage thresholds adjustable to +/-30% and a «Phase rotation»
monitoring function
A fixed 3-second fixed delay prevents unwanted start-ups following mains micro disconnections
A power return delay (1 minute fixed) to ensure that mains power has been restored before the installation is switched to the mains - A set of reliable, robust SCHNEIDER switches
- Protection of changeover switch control components via three-pole circuit breaker
- Protection of a single-phase output to the generator auxiliaries via single-phase circuit breaker
- Optional lightning arrester
- Connection of the load to terminals and directly to switches for the mains and the generator
- Two dedicated terminals for connecting the generator starting order
- Test on load switch on the front of the control unit
- Voltage on indicator lights for both sources on the front
- Closing indicator lights for both switches on the front
VERSO 200
The Verso 200, available from 200 to 3200A is autonomous and complete. This
changeover switch is perfectly suited to low voltage industrial applications.
ADVANTAGES OF THE PRODUCT
- Detachable mains measurement board:
in the event of damage due to a mains
overvoltage situation, only the mains
measurement board needs to be replaced. - Reduced wiring: the source changeover
switch is connected as close as possible to
the network protection with an emergency
genset installed at a distance. - By programming: the product is fully
adaptable to the customer’s network - Electrical measurements of the mains
power and genset: indicates the status of
the installation, fault finding, settings … - Continuity of service: in the event of
a motorisation fault, the supply to the
installation is maintained. - Protection: protection present for the
genset auxiliaries. - Adaptability to unstable networks: this
control unit is suited to all types of unstable
networks. - Event history



